Reduce your gas accounts with softer water for your central heating system
Reduce your gas accounts with softer water for your central heating system
You can find a number of products that can be added to your heating system to help it run smoother as well as some products that can take care of themselves. In either case, your system will be well-prepared to work efficiently if you take the time to maintain it. It is now well known, thanks to advice given by governments and environmental organisations, that we should save energy wherever possible by turning off lights, washing clothes at lower temperatures, switching TVs off and turning down thermostats. By doing all this, you not only cut down on the electricity account, but also protect the environment. But how about making your central heating system operate more effectively? The accumulation of gunk and limescale deposits in your central heating system will reduce its efficiency.
You should be thinking about water treatment to stop this accumulation of gunk and limescale, especially if you live in a hard water area.
The lifeblood of your heating system is the water that runs through it – Water Treatment maintains that water at an optimal quality to prevent damage and breakdown of the central heating system. A wide range of water treatment products including scale reducers and inhibitors, magnetic and electronic lime fighters, sludge removers, noise reducers and anti-freeze are available.
You can either get hard or soft water in UK, depending on the area you live in. Living in a hard water area means that you are prone to limescale your kettle probably being the first place that you will notice limescale deposits as well as on your showerhead and taps. Limescale reduces efficiency and adds to heating bills. The energy cost in a boiler cylinder with limescale lining can be 40 percent more than a clean boiler leading to more expensive gas bills. Limescale is nothing, but calcium deposits in your central heating system.
Soft water area residents should not worry too much, but it doesn’t hurt to ask for help if you are not so sure.
The way that most water treatments work is by changing the molecular structure of the water’s particles which, in turn alters the way it behaves. Water treatment works in different ways, it can change the structure or prevent the formation of solid or remove the offending particle altogether.
Minute organisms can enter through the vents and storage tanks of the boiler.
Your system must be installed by a professional, never connect brass or copper to aluminum as this can lead to corrosion through the interaction of these metals. You must get your gas connections done by a person registered with CORGI as the law requires this.
You should decide about the water treatment well in advance, especially when you are installing a new heating system. If you are revamping the old system, you should rinse out the whole system before adding the water treatment method.
Products added to the mains supply can soften hard water and improve the quality of water for domestic use, but they do not prevent or remedy deterioration of the central heating system. They will not have any effect on how efficiently your system works, but they will make detergents and soaps lather up more easily.
Corrosion, limescale and biological growth are the three things that you should be looking to limit or stop from occurring.
Corrosion can start from the moment the system is set up and filled with water from the mains supply. Corrosion causes sludge in the system which can restrict the circulation causing cold spots on your radiators. Pinholes can develop in the radiators which can make the boiler noisy when heating up.
Limescale results from the presence of calcium and magnesium in water, hard water regions have these elements more than the rest of the country. When the water is heated, these minerals deposit, forming a hard crust that grows with time and blocks the pipes. A vibrating and wheezing heating system can be a real nuisance.
We recommend starting with the manufacturers themselves. Chemical test kits are available that allow you to check the probability and speed of corrosion by gauging the levels of ph, chloride, iron and copper. Heat saving will help everybody. This can be a fundamental matter to deliberate. After managing to enter the system, it spreads by creating slime and sludge. In addition to the tank, they grow into the pipes and block them; thereby the efficiency of the system is further reduced.
There is a lot of free advice on the internet. Take a look at this for a few minutes to improve your awareness. Biological growth is another thing that should be avoided at all costs. This site contains a list of manufacturers, and the products that they produce and sell to help maintain your central heating. Blogs also offer ample source of free help and information or you can contact the companies with any questions.
Now you should be able to choose and install an effective central heating system which is enjoyable, healthy and cost-efficient on both kinds of green!.
