Why should I power flush my central heating system
Why should I power flush my central heating system
With each passing year internal sediment evolves within your boiler and central heating system. This will reduce efficiency and may need to be flushed out as this deposits coats the piping and reduces circulating efficiency.
The buildup of contaminants can be counteracted by a commercial cleansing process known as a powerflush.
Any system can develop this sludge problem over time, there will be more in older heating systems. If you purchase new central heating radiators or a boiler you should give serious consideration to powerflushing the central heating system before these new parts are installed. Fitting new components will inevitably disturb the contamination causing it to circulate through the system once more.
It is beneficial to add corrosion inhibitors to your gas boiler and central heating system to slow this build up of sludge .
powerflushing your heating system can also help with some of the other issues it can experience as outlined below : -
* heating radiator cold points
* gas boiler contaminants
* water pump circulation problems
* clogging pipework
* corrosion of the gas boiler and central heating system internals
* reduced water circulation through blockages
* loud noises in the system
As a result the advantages of a professionally rendered powerflush could be :-
* extended central heating water pump life as contaminants are removed from the circulating water
* heating radiator heating efficiency improvements as colder patches are eliminated
* improved heating system efficiency so reducing fuel costs in future years.
* better heat exchanger performance lowering energy consumption
* reduction in in hydrogen gas accumulation reducing internal corrosion
* clearing your system of contaminated water which could lead to internal system corrosion
An automated power-flush simple machine is used to carry out the gas boiler and central heating system cleansing. The heating system sludge is filtered out as it is routed through the machine. The cleaning process is completed by the cleansed water being flushed through your central heating system. The engineer will usually top up the heating boiler and system by adding a corrosion inhibitor to protect it in future years.
To see to it that you get the expected advantages the power-flush should be completed by a trained plumber.
